Troubleshoot Ethernet Driver Issues

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on whatsapp


Troubleshoot Windows 11 Ethernet Driver Issues

The correct Ethernet driver is required for Windows 11 to properly access a wired network. Problems with this driver lead to errors, problems using the Internet, and often no Internet connection. In this guide, we are going to tell you how to fix Ethernet driver issues in Windows 11.

Note : This guide is almost exclusively for driver-related issues with the Ethernet card.

What Causes Problems with the Ethernet Driver

Problems with device drivers are often the cause of hardware problems because drivers are necessary components for your computer to communicate properly with hardware. Your network interface card is a physical device like everything used by your computer, so it can also experience driver issues.

Sometimes the Ethernet driver becomes so outdated that it has issues that only an update can fix. In other cases, the driver may have been corrupted due to a software conflict or a virus.

How to Fix Windows 11 Ethernet Driver Issues

It’s tempting to just focus on the Ethernet driver when troubleshooting this problem. However, since there can be slightly different reasons for the Ethernet problem that are not directly related to the driver, here is a mix of things you can try to troubleshoot Ethernet issues.

1. Restart the computer. Restarting is a common first step for most technical issues, and that might be all you need to do to fix the Ethernet problem.

An easy way to restart Windows 11 is to right-click the Start button and select Shut Down or Log Out > To restart.

2. Switch to Wi-Fi, if possible. If your computer may access the wireless network, it makes sense to continue with these steps to troubleshoot an Ethernet-only issue.

If you also cannot access the Wi-Fi network, there are likely wider issues at play. Continue with the relevant steps below which apply not only to a wired network, but also to resolve the wifi problems.

3. Force Windows to reinstall the Ethernet driver. To do this, open Device Manager (right-click on Start to find it), expand the group Network adaptersright-click on the Ethernet device and navigate to Uninstall Device > Uninstall.

After a restart, Windows will automatically identify the device and reinstall the driver.

Reinstall the Ethernet driver

4. Run the built-in network troubleshooter, located here: Settings > System > Repair > Other convenience stores. Select Execute next to Network adapter for Windows to attempt to identify and fix the problem.

5. Reset Windows 11 network settings. This will remove and then reinstall the Ethernet adapter and reset various network settings to their default values.

This tool can also be found in Settings: Settings > Network and Internet > Advanced network settings > Reset of the network > reset now.

Reset Windows 11 Network Settings

6. Run a driver update tool to check for Ethernet driver updates. The existing driver may be entirely missing, corrupt, or outdated, which may be the cause of the Ethernet problem.

Note : A driver updater can still work even if you don’t have internet. Browse the list linked above to find one that works offline, then follow the instructions in that app. This will involve identifying the driver you need, downloading the driver from a working computer, then copying it to Windows 11 to install.

7. Perform a netsh winsock reset. It’s not directly related to the Ethernet driver, but it can be useful for general network connection issues.

8. Follow this link to learn more about what it does and how to do it. If you are already comfortable with the command prompt, run this command, then restart your PC:

netsh winsock reset

8. Plug the cable into another Ethernet port on the router and make sure both ends, including the one connected to your computer, are secure. Again, this has nothing to do with the device driver, but it could be the solution to a general no wired internet problem.

You don’t need to buy a new router if just one port is bad, because most people can live with one port that doesn’t work, as long as there are others that can be used at the same time. square.


FAQs

How to Update Ethernet Drivers in Windows 10?

To update drivers in Windows 10, launch Device Manager from Control Panel or use the keyboard shortcut WIN+X. Select Network adapters to expand the category > right click on the driver > and choose Update driver.

How to reinstall Ethernet drivers in Windows 10?

Automatically reinstall network driver from Device Manager > Network Adapters. Right-click the adapter > choose Uninstall > restart your computer. If you’re having trouble with a driver update, you can also roll back a driver and reinstall a previous version by right-clicking the driver and selecting Properties > Rollback driver.

If you have any questions or suggestions, let us know in the comments. Also check this guide if you want to learn how to fix unidentified network in Windows 11.



Source link

Leave a Reply

Related Posts

Table of Contents