Mac: here is the trick to configure the switch to a 5GHz network

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on whatsapp



At home or in the office, your Internet connection tends to slow down when other users are connected to the same Wi-Fi network. On the other hand, bandwidth problems can also arise when your computer is placed too far away. your router, especially if you live between thick walls.

In any case, to provide a more reliable connection, it is advisable to use a different frequency. Usually, there are two bands to choose from: 2.4GHz and 5GHz.

Automatically, your Mac should select the best option. However, if you want to take control and force the switch to 5GHz, then here’s how.

The difference between 2.4GHz and 5GHz

Despite their differences, these frequencies complement each other. The 2.4 GHz band is slightly slower, but its signal is easier to pass through walls, while the 5 GHz is faster and less congested.

To find out which band your Mac is connected to, press and hold Option and click on thewi-fi icon at the top right of your screen.

In the drop-down menu, you will have more information than it normally displays. Under Preferred network, take a look at the option Channel to find out how often your computer is running.

Configure 5GHz on your Mac

Before anything else, remember to check that your router is compatible with dual-band connections. Most do, but a quick glance at your model’s features will help you make sure.

In order for your Mac to be connected to the 5GHz channel rather than 2.4GHz, you will need to separate the bands and give them a different name. To do this :

  • Search your Mac.
  • Search AirPort Utility, then open it.
  • Select your terminal.
  • Click on Edit.
  • Appointment Wireless, then on Wireless access option.
  • Change the network name, end with Record.

Then, so that this new band is automatically chosen by your macOS, go to your System Preferences, then Network. In the lower right corner, click the option Advanced.

You will then see the networks that your Mac searches for when it tries to connect to Wi-Fi, listed in sequential order. To force your computer to connect to a 5GHz band, just hold down on the network of your choice and drag it to the top of the list.

Now when you turn on your Mac, it should directly adopt the 5GHz network.





Source link

Leave a Reply

Table of Contents