If you are wondering how to install Hiren’s Boot on a bootable USB stick, the following article describes the steps to follow to achieve this. Now, before talking about this, it is necessary to clarify what this tool is and how it works. This is a LiveCDIn other words, an independent startup device that allows you to repair Windows operating system startup failures and “bring life back” to the computer.
The same can be installed on CDs, DVDs or USB sticks to repair or recover any version of Windows, even if the operating system does not start. In addition, it includes other functions that are very useful for any expert in the field, such as: remove viruses manually and save hard drives which are considered lost. Now that Hiren’s Boot is clear, it’s time to learn how to install it on a bootable USB drive, read on to find out.
Download Hiren’s BootCD PE
The first step to install Hiren’s Boot on your USB stick, is to download the program, which you can do for free from its official website. It should be mentioned that this new version of the program It is based on Windows 10 PE 64-bit operating system. It is compatible with UEFI firmware setup and only requires 2 GB of RAM to operate. On the other hand, among the main functions of this software, they meet:
- FSViewer v6.5.0
- Free office rev 703
- Sumatra PDF v3.1.2
- 7-ZIP v18.05
- ExamDiff Pro v10.0.0.6
- HxD v2.0.0
- Notepad ++ v7.5.6
- WinMerge v2.14
- ESET Online Scanner v2.0.22
- Malwarebytes Anti-Malware v188.8.131.523
- GSmartControl v1.1.3
- HDDScan v4.0
- HDTune v2.55
- WD Data Lifeguard Diagnostics v1.31
Install Hiren’s BootCD PE
When you have the program on your computer, it will be time to boot the usb stick or usb stick to install the ISO by Hiren’s Boot. For this you can use programs like Rufus, which allows you to create CDLive or bootable drives Independent, quickly and easily. It is available in over 15 languages and is compatible with a large number of operating systems.
In addition, does not require installation on the computer. So by simply downloading the executable file, you can format and boot any USB drive you want. Now you have to keep in mind that any file stored in memory will be lost. Therefore, it is recommended to make a prior backup of this information. With that in mind, follow the steps below to burn Hiren’s Boot to your external memory:
- Go to “team“And check the letter assigned to the USB drive you want to boot.
- Once you know the letter assigned to your removable memory, open Rufus Yes select unit in question in the tab “Apparatus”.
- Now in the section “Start-up choice” Mark “Disc or ISO image“And click”To select”To find the file Hiren Boot ISO that you previously downloaded.
To note: The other sections of Rufus should be as follows: Partition scheme: MBR. Target system: BIOS or UEFI and in File system: NTFS. For its part, the option “Cluster size“Will stay with the default values. On the other hand, it is important to underline the section “Advanced formatting options“From where you can set some parameters for formatting your USB drive.”
- Click on “Start”.
- A dialog box with a warning will appear, click “Accept”.
You must now wait for the installation and start-up process to complete. You can check the percentage of progress on the green bar shown below. When everything is ready, press “To close”And check that the unit has been registered correctly.
If the procedure was successful, all you have to do is go to the team where you want to use Hiren’s Boot, enter BIOS Yes configure boot from USB key in the “Boot” tab displayed at the top.
As you can see, although it requires several steps, installing Hiren’s BootCD PE on your USB drive is a straightforward process that will allow you to repair any defect that prevents your computer from starting.