How to log into your home router as an administrator

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on whatsapp


Use the router’s IP address to access its settings and make changes

To access a router as an administrator, you need to know the router’s IP address as well as the administrative user password and username.

Follow these steps to log into your router as an administrator:


These steps work for almost all routers and modems, and can be accomplished by any modern web browser, on desktop devices and mobile devices.

  1. Make sure your computer is connected to the router with an Ethernet cable or a wireless connection.

If you are trying to access a router outside of your network, you need to enable what is usually called remote administration. For this to work, you also need to know the external IP address of the router so that you can enter it in the browser. However, this type of connection is not guaranteed even if the remote administration setting is enabled, because the IP address can easily change (if it is a dynamic IP address, which is the case most home networks).

  1. Identify the IP address of the router. Most routers are made to use a default address such as 192.168.0.1, 192.168.1.1, 192.168.2.1, or 192.168.1.100.

If that doesn’t work and you don’t know what the router’s default IP address is, or if it has been changed, see our guide How to find your default gateway IP address.

  1. Open a web browser such as Microsoft Edge, Internet Explorer, Chrome or Firefox and request a connection to the router using its IP address. For example, type http://192.168.1.1 in the address bar to connect to a router with an IP address of 192.168.1.1.
  2. Enter the administrative login information to authenticate yourself and access the administrative settings.

Routers come with default usernames and passwords, typically the word ” admin “, but they may be different for your router (some may not even have a password or use a username).

Follow these links to see the default passwords and usernames for NETGEAR, D-Link, Linksys, and Cisco routers if you have one of these routers, or consult the router’s documentation if you are unsure. know what it is.

Some routers are not accessible as described above. Most are, but some, like Google Wifi, require different (usually easier) steps, like using a mobile app.

What if I cannot access my router?

If after trying the username and password on the router, the browser returns an error message, your computer may not be connected to the correct router. Or, the combination of username and password may not be correct.

If you are sure you are using the correct IP address to access the router, try the following procedures:

  1. Restart the router.
  2. Open a web browser such as Microsoft Edge, Internet Explorer, Chrome or Firefox, and request a connection to the router using its IP address.
  3. Temporarily deactivate the firewall.
  4. Open a web browser such as Microsoft Edge, Internet Explorer, Chrome or Firefox, and request a connection to the router using its IP address.
  5. Reset your router to factory defaults.

The router is then returned to its default state with the IP address, user name and password provided to it.

  1. Open a web browser such as Microsoft Edge, Internet Explorer, Chrome or Firefox, and request a connection to the router using its IP address.

Administer a router over Wi-Fi

It is best to install a router for the first time through a wired connection so that the connection will not be interrupted if security or wireless settings are changed in the process.

When accessing a router over Wi-Fi, keep the computer close to the router, in the same room if necessary, to avoid loss of connection due to interference or weak wireless signals.



Source link

Leave a Reply