If you are facing a reboot and you select an appropriate boot device error or Insert bootable media into selected boot device, read on to fix it on Windows devices.
The error message “Restart and select the correct boot device” appears when the operating system (OS) cannot connect to the hard drive or drive. It refers to a BIOS error; you may receive the error message on any PC or laptop running Windows 7/8/10. It always appears on Toshiba, ASUS, Gigabyte, and Acer PCs or laptops.
The main causes of ‘Restart and select correct boot device’ issues are inaccessible boot device, corrupt BIOS / UEFI installation, broken bootloader, corrupted hard drive, damaged hardware, and many more. The “restart and select the correct boot device” error occurs when the BIOS cannot detect the device on which Windows 7/8/10.
With so many different solutions available here, you can quickly fix this “Restart and select the correct startup device” error in Windows 10/8/7. Depending on the error, you can also restart the PC, hoping that it fixes the error.
What is restarting and selecting the correct boot device?
If you are one of the Windows candidates who want to upgrade to a larger hard drive by downloading or installing an additional hard drive (HDD). There is a maximum chance that you will receive a Restart and select the correct Windows 10 boot device error message while booting your PC after replacing the hard drive.
Based on the BIOS creator for each particular motherboard, the message that occurs may be slightly different, but the meaning remains the same. You must complete the PC request; otherwise, it will always fail to load the operating system. The message “Restart and select the correct boot device” appears for many reasons.
7 easy solutions to fix restart and select suitable boot device error:
Solution 1: Check the power cable:
- First, turn off your PC or laptop and unplug it from the power source as well.
- After that, eliminate the cabinet and see the cable connecting your hard drive to the motherboard.
- If you are looking for a wear crack in the cable (which is likely to happen over time), replace the old wire with the last one. If you are looking for a loose connection, take the wire apart and reconnect it properly.
- But you never look for the physical loss of the wire, nor it is inappropriately attached, then move on to the next solution.
Solution 2: Disable or Enable Legacy Boot:
- Here it will help you if you restart your laptop or PC. Upon startup, instantly enter your PC’s UEFI settings menu.
- Look for the “Legacy Boot” option, which can be found under UEFI settings. If the Legacy Boot option is allowed, disable it. If it is disabled, allow it.
- Apply the above changes and restart your laptop or PC.
- When your PC or laptop starts up, check if the message “Restart and select the correct startup device” persists.
Solution 3: Use Diskpart:
- First, place the recovery media in your PC or laptop.
- After that restart your system and boot the media from the system you placed.
- The “System Recovery” choice window will appear on the screen, so you need to choose “Troubleshoot” and click on the “Advanced” option.
- Now choose “Command Prompt” and mention “Diskpart” and press “Enter” button to continue.
- Finally, mention the “Diskpart” and press the “Enter” tab. The “X” is the name of the drive to which the operating system is downloaded.
Solution 4: Check the system boot order in BIOS:
- To enter your PC’s BIOS, you need to restart your system.
- You need to enter Esc, Delete, F2, F8, F10 or F12 to access the BIOS menu of your PC or laptop.
- The key to accessing the boot menu differs from PC to PC and depends on the brand of computer you are using.
- After that, launch the Boot tab to display the last boot order used by your PC.
- Make sure your hard drive is chosen as the primary option. After applying all the changes, you need to press the “Save Settings” button in the BIOS menu.
Solution 5: change the CMOS battery:
The Complementary Metal-Oxide-Semiconductor (CMOS) battery is a small circular cell located in your board. If it is broken or fails, it is likely that you will encounter the “Restart and select the correct boot device” error.
- First, fire up your PC’s cover, use the motherboard, and remove or uninstall the CMOS battery.
- After that, grab the power button for a few seconds to release any remaining charge. Finally, replace the CMOS battery with another one.
Solution 6: Clean the RAM:
RAM is another important physical device that can cause a variety of issues including restarting and selecting an appropriate boot device error during boot if you haven’t removed or cleaned RAM in the past few years. So, to remove the error, you need to clean the RAM.
- Please turn off your PC and unplug it from the main board.
- Remove the outer cabinet by removing the screws from the top and bottom sides.
- Then look for RAM in the CPU, which is on the switchboard itself.
- After opening the RAM from the cleat, gently remove it or remove it from its slot.
- Clean the top and bottom of the RAM with a cotton cloth or a soft brush. After removing the dirt from the RAM, put it back on its slot, lock it and close the case.
Solution 7: reinstall Windows:
- First of all, you have to generate bootable media with its Media Creator and restart the computer from the media.
- Now run the “MiniToolShadowMaker”, which can be found under the “MiniTool PE Loader” page.
- After that, select the files you need to restore or backup and the path to the goal where you want to save the files.
- Open the backup by pressing the “Backup now” button.
- Finally, you can reinstall the desired Windows without worrying about losing the necessary files.
The “Restart and select the correct boot device” is a terrible error that troubles all versions of Windows operating system (operating system). This is a BIOS error; you can get it on any PC running Windows 10 or any earlier version of Windows operating system. This is the best time to apply the above methods to troubleshoot or fix the “restart and select the correct boot device or insert the bootable media into a particular boot device.”