How to fix my AirPods are connected but no sound

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on whatsapp


The problem of “my Airpods are connected but no sound” is not new. It is extremely frustrating and even more so when you have connected it to your device and double checked it. There are a few things to consider before you try to fix “My Airpods are connected but no sound” issue.

First, make sure the Airpods are fully charged. Now reset the bluetooth connection, go to Settings> bluetooth, forget about the device and then pair it with your device again. The next step is to adjust the settings, go to Settings> General> Accessibility and go to Audio / Visual, set the balance in the middle of L and R.

You need to know what is causing this problem and opt for the solution accordingly. Don’t go for a complicated solution if the reason is simple enough. You will get an idea of ​​the “my Airpods are connected but no sound” problem and can fix it without damaging them. Let’s go through each fix one by one.

SEE AS ​​WELL: How to check if used iPhones are stolen before you buy

1. Charge your AirPods

The most common answer to the question “AirPods say they are connected but no sound” is to have sufficient battery charge. With low power, they’ll never perform the way they’re supposed to.

Keep your Airpods charged whenever you’re done using them for the day. Also keep the charging case charged so that you can charge your AirPods in transit.

2. Check for any conflict with the connection

If you are using more than one Bluetooth enabled device, make sure that the unused ones have been properly disconnected. Otherwise, there will be connection problems between the devices and you will wonder “My AirPods are connected but no sound”. Also, don’t keep your iPhone or iPad more than 10 meters away when it’s connected to your AirPods.

By all means, keep away from any device whose frequency is similar to that of Bluetooth, such as WiFi. However, other wireless devices do not face this problem. If possible, avoid wireless video cameras, microwave ovens, cordless phones, and similar devices.

3. Clean your AirPods

Another answer to the “AirPods say they are connected but no sound” question may be the dirt and debris that has built up in your AirPods. They can obstruct the sound flow. Using a microfiber cloth and cotton swab can help remove dirt from AirPods. This combination has proven to be very effective time and time again.

On top of that, you also need to keep the charging case clean so that it can properly charge the AirPods. Do not use anything sharp to clean the awkward and hard-to-reach places on your AirPods.

4. Parameter adjustment

Any change to the audio settings can lead to the “AirPods says connected but no sound” issue. No matter how much you press the top volume button, things will stay the same. You need to go back to your settings and change them.

In addition to that, also check the Bluetooth settings. The steps to follow are listed below:

  • Open Settings> General .
  • Choose option Accessibility and click on the option Audio-visual .
  • Make sure that the balance between L and R is in the middle.
  • Go back to Settings and open the option Music .
  • Slide the volume limit to its maximum.
  • Go back to Settings and click on Bluetooth .
  • Finally, choose AirPods and turn off the option that reads Automatic ear detection .

After setting everything up correctly, you won’t have to worry about sound issues anymore. But if it persists, check out the other solutions.

5. Software update

Any operating system is bound to have problems and bugs. As you install more apps and update them, your device’s overall operating system requires the same attention. The developers support you in this case and they can fix these bugs.

Updating your iOS device isn’t rocket science.

  • Just open them settings , then go to General .
  • Now open the option that says Software update and follow the steps mentioned on your screen.

Once you get rid of the bugs, you won’t have to wonder “My AirPods are connected but no sound”. Even if there are bugs in your AirPods, you can still update them automatically after connecting them to your iPhone or iPad.

Regularly updating your system software is key to keeping all of your devices running smoothly. With each update, the developers aim to fix existing issues, issues and bugs to make the device more efficient.

6. Updating the Bluetooth connection

If you leave Bluetooth on long enough, you’ll end up thinking “My AirPods are connected but no sound.” Bluetooth is not WiFi and therefore will not work for a long time or over a long range. Updating Bluetooth can help you fix your AirPods audio issues.

It’s a straightforward process.

  • Open them settings and go to Bluetooth.
  • Deactivate the connection by pressing the Bluetooth button.
  • Wait a minute, then activate again by moving the button.
  • In the list of Bluetooth devices, tap the name of your AirPods and reconnect it to your device.

This is a very simple trick, but it helps more often than not.

7. Reset, forget and reassociate

If the previous solution didn’t work and you might still be thinking “My AirPods are connected but no sound”. This is most likely due to corrupted profile settings. This happens when your connection is suddenly disconnected.

This causes a change in the Bluetooth connection. To fix it, you need to rebuild your profile and then pair it again. The steps are as follows:

  • Open Settings and go to Bluetooth .
  • Tap the icon (i) to next to the name of your AirPods.
  • Select the option that says Forget this device and confirm it.
  • Perform a forced restart and wait for the startup to complete.
  • Place the AirPods in the case and wait at least 30 seconds.
  • Open the case and press the setup button on the back until you see a LED orange flash .
  • Close the charging case and wait a few seconds again before opening it for pairing.
  • Move the AirPods closer to your device and a setup icon will appear on the screen.
  • Finally, touch To log in and follow the steps on the screen.

Your connection profile has been rebuilt, the Bluetooth connection has been fixed, as has the audio problem.

You can also restart your iPhone before pairing the Airpods to the device again.

8. Resetting network settings

Your iPhone’s network settings handle multiple connections, with Bluetooth being just one of them. If your device meets audio problems when the bluetooth connection is enabled, corruption in the network may be the cause. This can however be fixed by rebuilding the network settings via restoring factory defaults.

  • Open Settings > General .
  • Now press Reset , then open Reset network settings .
  • During this procedure, you will need to provide a access code .

The process begins once you do. All of your network profile settings will be deleted and you will need to configure new ones. Once done, connect the AirPods and check.

Make sure to save all your Wi-Fi and other network passwords before resetting network settings. You will need to enter the passwords later when you choose to reconnect to these networks.

9. Check with another device

Sometimes the problem isn’t with your AirPods per se, but with the device it’s connected to. To find out if it is or not, connect it to another device and check if there is an audio problem. Even if this is the most unlikely case, it is still a possibility.

If your AirPods work with other devices, you can restore the device to factory settings using your PC. You can also solve it yourself. If that doesn’t work, use the DFU mode to restore your iPhone or iPad.

Please note that restoring your device to factory settings will erase all data. It is important to create and save a backup of your device before performing the factory restore.

READ ALSO: How to restart any iPhone even if the buttons are broken

This is usually not a highly recommended solution, as the restore process may void your device’s warranty options. Therefore, only proceed when you do not see any other way out. If you’re not even sure about 0.1%, don’t take a risk. Instead, contact the experts and ask them to fix the problem.



Source link

Related Posts

Leave a Reply

Related Posts

Table of Contents