Fix error 0x80070035 no network path found It is possible and we will teach you in the following guide everything you can do to find the solution to this annoying problem.
Windows surprises us with errors from time to time. Fortunately, you can still find a solution to such issues and in this case, we are going to explore the methods we can apply to resolve the error 0x80070035 no network path found.
Disable the firewall
The first thing to do is to turn off the firewall directly. Firewall is a network security system that monitors and controls our computer’s traffic, both inbound and outbound. Thanks to the firewall, we can block the applications so that they do not connect to the Internet or vice versa. It could be that this is blocking access and that is why this error is generated. We will have to disable it to verify it.
Enable the TCP / IP NetBIOS wizard
We can try to enable TCP / IP NetBIOS Helper to fix this annoying bug. For that, we will have to press “Windows + R” and write “services.msc” without the quotes. Then we press “Accept”.
We will now have to search for “TCP / IP NetBIOS Helper”. Once we have found it, we will need to right click and select “Properties”.
Here we are going to have to select “Automatic” in “Startup type”, then we are going to click on “Start”. To finish, click on “Accept”.
Enable NetBIOS with TCP / IP
Another thing that we can do is follow the steps that we will leave a little bit below to enable NetBIOS over TCP / IP and thus find the solution to this problem.
The first thing we’re going to do is press “Windows + R” to open the run window. We will have to write “ncpa.cpl” without the quotes and we will click “OK”.
Now in the “Network Connections” window we will need to right click on the network we are using and then select “Properties”.
We click on “Internet version 4 (TCP / IPv4)” and we click on “Properties”. In this new window, we will have to click on the “Advanced” button which is in the lower right part.
Here we will just have to go to the WINS tab and we will have to activate the option “Enable NetBIOS over TCP / IP” then we click on “OK”.
Share this with your friends!