You have a USB flash drive or hard drive in FAT32 format and want to convert it to NTFS to skip the 4GB limit for a single file. Or, you want to switch from NTFS to FAT32 for the compatibility of this file system with the majority of operating systems. Either way, here’s how to do it without losing data.
Discs in FAT32 can not store files larger than 4 GB. If necessary, you can store them convert to NTFS to avoid this limit without carrying out a traditional formatting which will cause the loss of your data.
Convert FAT32 drive to NTFS without data loss
The process is very simple and will save you from formatting the drive if you don’t have any other space to back up first. And while it was possible to make a backup, you might not want to engage in an annoying process that would first have you copying your files to another drive, formatting as NTFS, and then recovering. again the same files.
Converting FAT32 to NTFS is easily done on Windows with a simple command line. But before doing so, it is important to note that this action is irreversible following the same process. That is, it is not possible to convert NTFS file system to FAT32 using this command line.
To switch from FAT32 to NTFS :
- In the file explorer, note the letter assigned to your volume (USB key or external hard drive). For our example, this will be the letter G.
- Open the Windows command prompt (type cmd in the Windows search bar, then validate)
- Enter the command convert G: / FS: NTFS. Replace the letter G with that of your medium and press Enter.
- All you have to do is wait a few minutes for the conversion to take place. As soon as it is finished, a message will let you know.
So converting FAT32 file system to NTFS without formatting is quite easy on Windows. However, there is no gateway to switch from NTFS file system to FAT32, or at least without going through third party partition software that has this functionality. This is the case with Macrorit tool and AOMEI NTFS to FAT32 Converter.
Convert NTFS to FAT32 without data loss
Start by downloading and installing the tool Macrorit NTFS to FAT32 converter. It is free and easy to use. You have the choice between the installable version and the portable one which can run without installation. Then launch the application. It should show all internal or external storage devices that have an NTFS file system.
All you have to do is choose the desired disk then click on the “convert now” button. Then wait until the end of the process and you’re done.