5 cool DIY ways to keep your laptop cool

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on whatsapp


If your laptop slows down or crashes from overheating, it’s time to learn how to keep it cool with these DIY solutions.

Whether you use your laptop for work or play, there’s a good chance that it will shut down at some point due to overheating.

After all, laptops work hard to meet your demands, whether it’s printing, shopping online, media editing, or gaming. Heavy tasks will put a strain on a laptop, causing the processor and other components to work harder, overheat, and slow down. Excessive heat can kill a laptop, which is why it is a good idea to keep it cool.

While you can buy cooling solutions for your laptop, saving money in favor of a homemade laptop cooler is usually straightforward. We’ve rounded up the best DIY laptop cooler projects that you can copy to keep your laptop healthy.

SEE AS ​​WELL: 12 useful reasons to turn your phone into a webcam

Why should you cool your laptop

Heat affects all electrical devices. Confusingly, it is also generated by all electrical devices. As such, heat must be removed from crucial circuitry controlling your electronic devices, to enable efficient performance. Excessive heat can kill a laptop, which is why it is a good idea to keep it cool.

Phones and tablets can get hot, and their design and construction uses passive cooling, designed to mitigate and minimize any impact on performance without the use of fans. Game consoles and desktops have fans that suck air through the case, cooling the processor and other devices.

With laptops, the situation is somewhere in between. The body design and heat sinks use passive cooling, but there is almost always a fan, as well as a grille for heat dissipation.

Because there is so much going on inside a laptop, it’s hard to keep devices cool, especially when they’re under a heavy load. Paid laptop cooling solutions can be expensive or inadequate, which is why you should consider a DIY cooling fan for your laptop.

Note that your operating system or your laptop software may include a utility to control the fan speed. Among these options, it is not uncommon to find a “boost” setting, which can also act to expel dust from the device. If possible, try this to help cool your laptop and see if that has an impact before considering these DIY laptop cooling projects.

1. Single Fan DIY Laptop Cooler with LED

We’ll start with a simple construction, which includes a single cooling fan and a slanted structure on which to rest the laptop.

While other examples on this list rely on the power supply to turn the fan (s) on and off, this project includes a switch. As such, in addition to the basic carpentry skills needed to build the frame, you will need to familiarize yourself with a soldering iron.

To really finish this off, you can include an LED strip, as shown in the video. The results are pretty, uh, cool.

2. A homemade laptop cooler for gamers

If you’re looking for a laptop cooling solution with even more power, this project uses six fans.

Gluing the fans with a glue gun is the easiest step here. In addition to sorting out the wiring – wire strippers and a soldering iron are needed – you’ll also need to get some plastic tubing to hold it all together. This piping is basically a frame for fans to sit in, while supporting your laptop.

Also equipped with a switch, this laptop cooler is perfect for gamers who like to take their laptops to the extreme.

3. A homemade laptop cooler that looks professional

Most DIY laptop cooling pads can be simply put together using scraps of trash from around the house or shed. This project is a little different, requiring some sturdy tools and a serious approach that results in a professional looking laptop cooler.

With a unibody metal chassis, this project includes three fans to remove heat from a laptop. The 1mm thick aluminum foil also helps reduce the heat of the laptop, thanks to the passive cooling.

With felt feet and a striking design with a black spray paint finish, the project relies on a wide selection of tools, from heat guns to grinders. While the finished laptop cooler is a mind blowing job, this project is not for a DIY beginner.

4. This DIY laptop cooling pad uses all fans

Five fans are needed for this build, four full-size units, and a huge PC case fan in the center. If you have a good collection of old PC fans, this project is ideal for you.

With the fans glued together, the video shows how to set up a USB power supply and a power amplifier. With this cable properly wired, you will be able to power the DIY cooling pad from your laptop.

While the legs leave something to be desired – mostly long bolts – this is a competent build. If you’re looking for a way to cool your laptop, this is a great project to try.

5. Low specification DIY cooling fan made from a bottle

If your DIY aspirations are more modest, this could be the DIY cooling fan construction for you.

It uses packing foam, electric motor, single fan, lollipop sticks and plastic bottle. This last element may seem somewhat surprising, but its use is smart. After all, how many people looking for a way to cool their laptops without spending money on a cooling pad have aftermarket PC fans?

Here you will learn how to shape fan blades from a soft drink bottle and attach it to a motor. You will end up with a device that can support the laptop and dissipate heat. Not only is this a simple build, it uses things you would normally throw away.

READ ALSO: How to take a good selfie video: 10 tips

DIY laptop cooling solutions you can count on

By now you should have a good idea of ​​which laptop cooling pads above are suitable for your device. As a general rule, the lower the specifications of the laptop, the fewer cooling fans are required. After all, it probably doesn’t require the same level of cooling as a gaming laptop or a computer dedicated to high-definition video production.

Whatever homemade laptop cooler you build, don’t forget to check that the construction is strong enough to support your laptop. If in doubt, consider another solution.



Source link

Leave a Reply

Table of Contents